Brought to you by How + Print

Miter Boxes


   
 

Making and Using Tools - Percussion Tool


 
 

I See Tools in Junk by James E. Price

1 of 2  

Friday at an open air flea market I spotted the brass head of an old broken walking cane and saw a plane setting hammer. It cost me three dollars.

 

It was rather green with corrosion so when I got it home I cleaned and polished it as you see in the first photo. Searching through my parts I found a brass ferrule that would serve as a decorative cap for the back end of the mahogany handle.

I made a wooden peen out of a rosewood scrap and fitted it to one end of the brass rod gripped so tightly in the brass hand. Corners of the rosewood block were planed away to create an octagonal peen and the striking end was chamfered.

I now have a nice but cheap setting hammer worthy of striking irons and wedges in my old infill planes.

This is what the broken cane looked like after I polished the head.

This photo shows the back of the brass hand.

And, this is a view of the front.


 
Woodworker's Guide to Wood Collection only $79.99 at Shop Woodworking
1 of 2  
 

Support
wkFineTools.com


Sharpening Stones


Clamps



   

Copyright 2005-2018, wkFineTools.com and Wiktor Kuc.  All Rights Reserved.  Designated trademarks and brands are the property of their respective owners.
No part of the content from this website can be reproduced by any means without specific permission of the publisher.
Valid CSS!